Reference
RQT9334
(ENG)
41
This IP address is alre ady in
use.
Please check the IP add ress
setting.
≥This unit’s IP address is used by another device. Check the IP addresses of this unit,
personal computers, and routers, etc. If necessary, reconfigure them to avoid IP addresses
from being duplicated.
Unable to perform Connection
Test.
Please try again.
IP address not set correctly.
≥Turn the unit off. Discon nect the power sour ce (the AC adapt or or battery pack) an d
reconnect it and try ag ain. If the same sy mptom persists, th en consult your dea ler.
Connection Test was
unsuccessful. No reply
from host.
Please check the conne ction or
router settings.
≥If you use a hub, then check the connecti on between the hub and the router. (>28)
jUse the UPLINK port of th e hub to connect t o a router.
jIf the hub’s Link lamp does not light up, then check the cable connection, LAN terminal
connection, cable itsel f (a crossover cabl e may have been use d by mistake), etc.
≥Check the “IP Addres s”, “Subnet Mask” , and “Default Gatew ay” in the “IP Add ress/DNS
Settings”. (>29)
≥If the MAC address information is required, then press [SETUP] to display the “Network”
menu. (>28)
Network connection refused.
Please confirm Setup “BD-Live
Internet Access.”
≥When you set “BD-Live Internet Access” to “Allow (Limited)” and play BD-Live co ntents
which do not have a content owner certificate, the Internet access of the content is not
allowed. If you allow the conte nt to connect to Internet, set “BD-Live Internet Access” to
“Allow (ALL)”. (>32)
Unable to check for latest
firmware version.
Please try again later.
≥The firmware download serve r is currently unavailable. P lease try again later.
DMPB15P-RQT9334_eng.book 41 ページ ２００９年３月２８日 土曜日 午後２時３９分