RQT9334
(ENG)
10
Installation of the unit
Open the stand and set t he unit on a horiz ontal and stable le vel
surface.
≥Open the stand until the stopper wire is fully
stretched.
≥If the screen is rotated when the unit is
turned on, the display on the scr een will
disappear and the unit will be au tomatically
turned off. (>12)
≥The unit cannot be turned on in s ituations
other than 3 or 4 above or when the screen
is rotated. (>12)
≥Rotating the screen without opening the angle enough
may scratch the area ar ound the LCD etc. (>5, “Rotating
the screen”)
≥The unit’s speakers do not have magnetic shielding. Do not
place the unit near televisions, personal computers or other
devices easily influenced by magnetism. Do not keep this unit
and magnetized cards (bank cards, commuter passes, etc.)
close together.

When moving the unit:

≥Turn the unit off.
≥Close the screen and the stand.
≥Do not hold onto the screen or the stand.

About the LCD screen

There may be 0.01% or less chance of missing or constantly
turned on pixels, but this is not a malfunction.

Attention

Do not place the unit with th e LCD display-side dow n when the
screen is open.
Doing so may scratch the surface of th e LCD as the displa y
and the area around the display are specially-processed.
1Open the screen.
3Turn the screen
outwards and close.
2Rotate the screen.
4Open the stand and
set the unit vertically.
DMPB15P-RQT9334_eng.book 10 ページ ２００９年３月２８日　土曜日　午後２時３９分