Panasonic DMP-B15 Changing the unit’s settings, Display, TV Aspect/HDMI Function Settings

Changing the unit’s settings (continued)

“Display”

Status Messages	≥Automatic	≥Off
Choose whether to show status messages automatically.
On-screen Language	≥English	≥Français ≥Español
Choose the language for these menus and on-screen messages.
Screen Saver Function	≥On:
This is to prevent burn-in on the television screen.	j No activity has occurred for 10 minutes or longer, the
	screen swtiches to the other states automatically.
	j When playing the 4:3 image, the masked-off area on the
	screen become gray.
	[Only when connecting with an HDMI cable, “TV Aspect”
	(> below) is set to “16:9” and “HDMI Resolution”
	(> below) is set to any mode other than “480p”.]
	≥Off
License	Information about the software used by this unit is displayed.

“TV Aspect/HDMI Function Settings”

TV Aspect		To view an image connected to a 4:3 TV:
“TV Aspect” operates on the screen of the unit or the connected		≥4:3 Pan & Scan: Video recorded for a widescreen is played
TV.				as Pan & Scan (unless prohibited by the
				producer of the disc). When playing BD-
				Video, video is output as “4:3 Letterbox”.
		≥4:3 Letterbox:		Video recorded for a widescreen is played
				in the letterbox style.
		To view an image on the unit or connected to a 16:9
		widescreen TV:
		≥16:9:		Video recorded for 4:3 aspect screen is
				displayed as a 4:3 ratio image in the center
				of the screen.
		≥16:9 Full:		Video recorded for 4:3 aspect screen is
				displayed as a horizontally stretched 16:9
				image.
HDMI Connection
≥Press [OK] to show the following settings.
	HDMI Resolution	≥Auto:		Automatically selects the output resolution
	The items supported by the connected devices are indicated on			best suited to the connected television
	the screen as “¢”. When any item without “¢” is selected, the			(1080/24p*, 1080i, 720p or 480p).
	images may be distorted.	≥480p		≥720p
	≥If the image is distorted, set to “480p” or set again correctly.	≥1080i
		j When the unit is connected to an amplifier/receiver that does
		not support the resolution set on the unit, the video cannot
		be output properly.
		* 1080/24p can only be output in the conditions below when
		“24p Output” (> below) is set to “On”.
		j [BD-V]Playing back 24p images
		j [DVD-V]Playing back with the settings for playback “24p”
		(> 24) “On”
	24p Output [BD-V] [DVD-V]	≥On:	Images in 1080/24p are output in 24p as they are.
	This unit displays each frame at 1/24 second intervals – the	j When outputting 1080/24p signal, we recommend using
	same interval originally shot with the film camera.	High Speed HDMI Cables that have the HDMI logo (as
	≥Only when this unit is connected to a TV supporting 1080/24p	shown on the cover) and are less than 5.0 meters (16.4 ft.)
	output via an HDMI cable, you can set to “On”.	to prevent video distortion etc.
	≥If this unit is connected to an HDTV through other equipment,	≥Off
	it must also be 1080p compatible.
	HDMI RGB Output Range	≥Standard: The video is output as it is.
	Effective when connected to a device that only supports RGB	≥Enhanced: When the black and white contrast of a video is low,
	output.		the signal is enhanced to reproduce clear video.
	HDMI Audio Output	≥On
	Set whether or not to output audio from the HDMI AV OUT	≥Off
	terminal.
	VIERA Link	≥On
	Set to use “HDAVI Control” function when connected with an	≥Off:	Select when you do not want to use “HDAVI Control”.
	HDMI cable to a device that supports “HDAVI Control”.

RQT9334

(ENG)

34