Once activated, material cannot be returned to its original form. Check carefully before proceeding.
Press [3, 4, 2, 1] to select a still picture and press [ENTER].
A check mark appears on the still picture.
0001
≥Repeat this if you erase more than one still picture.
Press [3, 4, 2, 1] to select “Erase” and press [ENTER].
A confirmation screen appears.
Press [2, 1] to select “Erase” and press [ENTER].
Selected still pictures are erased, and the still picture select screen reappears.
To select all the still pictures in the folder | To erase check marks |
Press [3, 4, 2, 1] to select “Folder” and press [ENTER]. | Press [3, 4, 2, 1] to select the still picture or “Folder” with the check |
(A check mark appears on the folder’s name; check marks | mark and press [ENTER]. |
inputted separately will be erased.) |
|
Press [3, 4, 2, 1] to select a still picture and press [ENTER].
A check mark appears on the still picture.
0001
≥Repeat this if you set protection of more than one still picture.
To select all the still pictures in the folder
Press [3, 4, 2, 1] to select “Set Up” or “Cancel” and press [ENTER].
To erase check marks
Press [2, 1] to select “Yes” and press [ENTER].
The lock symbol appears on the still picture when the still picture is protected.
Editing
Press [3, 4, 2, 1] to select “Folder” and press [ENTER]. (A check mark appears on the folder’s name; check marks inputted separately will be erased.)
Press [3, 4, 2, 1] to select the still picture or “Folder” with the check mark and press [ENTER].
Press [3, 4, 2, 1] to select a still picture and press [ENTER].
A check mark appears on the still picture.
0001
≥Repeat this if you print more than one still picture.
Press [3, 4, 2, 1] to select “Set Up” and press [ENTER].
Press [2, 1] to set number of print (0 to 9).
Press [3, 4, 2, 1] to select “Set” and press [ENTER].
The DPOF mark appears if you set one or more pictures to print.
To select all the still pictures in the folder | To change print (DPOF) settings | |
Press [3, 4, 2, 1] to select “Whole” and press [ENTER]. | 1. | Press [3, 4, 2, 1] to select a still picture or “Whole” with the DPOF |
(A check mark appears on the folder’s name; check marks |
| mark and press [ENTER]. |
inputted separately will be erased.) | 2. | Press [3, 4, 2, 1] to select “Set Up” and press [ENTER]. |
| 3. | Press [2, 1] to change the print setting. |
|
| ≥The print setting will be canceled if you set the number of print to “0”. |
| 4. | Press [3, 4, 2, 1] to select “Set” and press [ENTER]. |
Once activated, recorded contents (including protected still pictures and computer data) will be completely erased. Check carefully before proceeding.
[Note]
Press [2, 1] to select “SD card” or “PC card” and press [ENTER].
Press [2] to select “Yes” and press [ENTER].
Press [2] to select “Start” and press [ENTER].
Formatting starts.
Press [ENTER] to complete
the procedure.
≥The cards formatted on this unit may not be usable on other equipment.
≥Make absolutely sure not to pull the AC power supply cord out until a message indicating completion appears. This may result in loss of card use.
41
RQT6986
