Ethernet/ RS232C Ports

FP Web-Server V2.11

 

 

The following settings in GKWIN are required:

Comments:

If the FP Web-Server is connected, do not activate the check box "Use ET-LAN"! In the setup example above, only PLC No. 3 is an ET-LAN unit.

Any communication via Ethernet must be stopped before a new configuration is sent to the FP Web-Server. For example, the FPWIN Pro online mode must be ended before changing the configuration of the FP Web-Server. Terminate access to a GK panel before changing/updating the FP Web-Server configuration.

c)Using a second FP Web-Server setup as transparent port client, RS232 communication via Ethernet can be established. Such a port client can be used for:

Programs (DOS programs) with no Ethernet support that use the RS232 port only

To upgrade any RS232 device with Ethernet connectivity, set up the transparent port as follows:

106