FP | 3.6 Generate a New Configurator Project |
|
|
3.6 Generate a New Configurator Project
After having started the Configurator, a Configurator project can be opened from the local hard drive with [OPEN]. A Configurator project consists of the configuration plus the email texts plus the HTML pages. Upon the initial start the "default_project" is automatically offered with [OPEN]. With [OPEN] you can also load one of the examples (see "Description of the HTML Examples" on page 161) (example1 to 9). You can save it under a new name with [SAVE AS]. On the "Config" page you can adjust the following most important settings. At least the following inputs have to be made:
•The IP configuration (see "Determination of the IP Configuration" on page 36) has to be entered accordingly.
•The RS232C parameter to the PLC may have to be adjusted (19200 8O1 is
•It is also recommended to enter an individual user name and a password of your own.
•The http server has to be activated for this initial test. (Please turn off email and PPP!):
For the initial test, no other parameters have to be altered. Save the changed project with [SAVE].
Comments:
•To receive additional help and information on the various Configurator entries, please move the cursor to the respective input field and press <F1>.
•With this version of the FP
37