FP Web-Server V2.11

3.4 Installation of the Configurator Program

 

 

3.4 Installation of the Configurator Program

To be able to configure the FP Web-Server, a Windows computer with an Ethernet network interface card has to be connected to the same network as the FP Web-Server. The computer must be configured in such a way that it supports the TCP/ IP network protocol.

To install the Configurator (administrator rights are needed), start the setup program on the CD and follow the instructions of the installation program "Control FP WEB Configurator Tool". Various examples (see "Description of the HTML Examples" on page 161) and HTML pages are installed along with the Configurator. In addition, the tool DnsDisp.exe, which locates DNS addresses of an Internet Service Provider (ISP), is copied to the installation folder.

Further information:

•Install the FP WEB Configurator Tool

For detailed information, refer to the file "JavaRuntimeStart.pdf" on your installation CD-ROM in the sub-folder "JavaApplets".

•Contents of the CD and Auxiliary Programs (see page 160)

The Configurator can be started in the Windows start menu under "Program Files/ Panasonic MEW Control/ Configurator/ FP-WEB2/ FP-WEB Configurator 2".

35