FP | 10.1 The Internet |
|
|
terminal program to enter the appropriate AT commands (see modem manual):
-Ignore DTR changes (AT&D0)
-RTS/CTS hardware handshake (AT&K0&R0)
-No wait on dial tones (ATX3)
This setting is saved with the command AT&W for the next
The enhanced email functions like POP3 login and name resolution via DNS can also be tested in a LAN, i.e. also in the local Ethernet a POP3 login and DNS access can be tested. The network administrator can provide the parameters and addresses.
To test the Internet dialup and the Dialup ISP parameters, a Windows computer with ‘remote dialup networking’ can be used. This setup plus an email client like “Eudora” or “Outlook” can be used to test the email servers and the Email ISP parameters.
For tests in Germany, we included "Example7".
Later versions will implement an extended status display.
FPYou can also configure a second FP
Please note the following when a cellular phone (GSM) module is used by the FP
1.At the dialog "Email Server Settings" enter a high value (17000ms or more) for the timeout of the DNS and Email Server.
2.At the dialog "Internet Dialup Settings" only the baud rate can be set. The FP
3.Be careful with the GSM antenna! Maintain distance to other units (PLC, modem, FP
4.Set the GSM module to the factory settings (default settings) before connecting to the FP
5.Please reboot (power up) the FP
6.Most of the GSM providers also offer Internet services. In this case these providers will not allow you to dial up other Internet Service Providers via GSM! I.e. if you have a GSM contract with company XYZ and this company also offers Internet
7.The PIN code entry command AT+CPIN=xxxx can be entered in the text field
135