FP Web-Server V2.11

9.2 Dial-In Inputs and Parameters for PPP-Server

 

 

9.2 Dial-In Inputs and Parameters for PPP-Server

In the following, the input fields of the "Dial-In" tab of the Configurator for the PPP-Server configuration are described.

For a detailed description of each field or button in the dialog, set the cursor into the field and press <F1> or highlight the button with <Tab> and press <F1>.

Comments:

•The PPP-Client has to be set up in such a way that it accepts the remote IP address from the PPP-Server.

•The modem and the transparent TCP/ RS232C port cannot be used at the same time (except when a second FP Web-Server unit is used).

•The modem has to be connected to the 9-pin RS232C port of the FP Web-Server. The modem must be set up to support the RTS/CTS flow control.

•For a detailed description of the cables refer to PLC Connection, Cable Drawings, Modem (see page 162).

127