FP | 6.1 Email Functions of the FP |
|
|
The communication parameters for RS232C to the PLC for email handling is defined in Configurator's tab "Config".
Open the "Email" tab in the Configurator for all further settings:
"Email sending enable":This setting is used to turn the email function of the FP
Refer to the online help under the keyword Email Server Settings for detailed information.
"Email server address":The name of the server or the IP address configured in the Email Server Settings dialog is shown here.
"Email sender address":The email sender's address (email address of the PLC, i.e. the FP
Always enter the email sender's address without <> characters!
Japanese characters are not allowed, nor are ASCII characters that contain umlauts.
[Internet Email:For detailed information refer to the section Internet Email Settings (see page 130).
57