Email Setup | FP |
|
|
The PLC internal relay Rxy is prompted by the FP
If an error occurs, the Rxy+1 is set by the FP
This setting also has to correspond to the PLC Program (see page 61).
"DT PLC address register":PLC
DTzz+1: For sending an email, the value (Content) of the storage location DTzz+1 is read by the FP
Data in the FL range cannot be used!
This setting also has to correspond to the PLC program (see page 61).
"Poll time delay":After the time interval has been predefined (for example every 7 seconds), the FP
The "Poll time delay" works in the range of 1 to 60 seconds.
This interval has to agree with the "Server_Timeout" definition in the global variables of the PLC Program (see page 61).
"Email recipient address: x":Predefined email address of the recipient No.0 to No.3: With the [Spin] buttons (arrow up/ down) you can choose among the 4 input fields for the recipient's addresses.
Always enter the predefined email address of the recipient with <> characters! Umlauts and Japanese characters are not allowed.
A recipient's address can be selected by using the numbers 0 to 3 in the PLC Program (see page 61).
"Automatic TO and FROM keywords":With these check boxes are selected, the FP
Predefined email texts (see page 59) No.0 to No.3:
58