Panasonic FP 3.3 Connection of the FP Web-Server

First Steps FP Web-Server V2.11

3.3 Connection of the FP Web-Server

For an initial function test (without the PLC data), the FP Web-Server has to be connected to the Ethernet and be supplied with operating voltage (24V DC and FG).

In the second step, the FP Web-Server has to be connected to the PLC (via RS232C). The RS232C setting of the PLC must correspond to that of the FP Web-Server. This setting can be defined in the PLC program (FPWIN Pro) under the system parameter settings.

Please remember the ID number found on the FP Web-Server's type label. You will need it when you configure the Web-Server.

34