FP | 7.1 Details on the FP |
|
|
to be transformed into an .MTM file by the
This is done automatically upon pressing the [SEND] button of the Configurator. If the 'HTML Compiler' discovers an input error, you receive an error message and the location of the error found in the HTML code is displayed. If the compilation is carried out error free, the file .MTM is created and transferred to the FP
An .MTM file corresponds to an .HTM file besides the following issues:
•A Java Script
•A meta tag has been inserted into the "Header" to control the optional, automatic reload of the page.
•The {...} PLC data fields are replaced by the respective number of spaces.
•The information (addresses, formats...) of the PLC data fields were attached as binary data.
•The maximum size of the .HTM and the .MTM file is limited to 64kB.
•Please do not use special characters and umlauts in {...} PLC data fields. The following characters are strictly forbidden: " _ % \ < > & ' ?
7.1.8 Data Fields for Displaying PLC Data on HTML PagesTo integrate PLC data display fields into an HTML page, the following parameters are enclosed in {...} curly brackets and inserted directly at the respective location on the HTML page.
•Data type and data address of the PLC
•Number of display locations on the page (for numbers)
•Specification of the format displayed (format of numbers or text ON/ OFF for internal relay)
The {...} fields can only be seen in the HTML editor (ASCII Text Editor) and are replaced by the respective number of spaces by the
77