First Steps | FP |
|
|
3.5 Determination of the IP Configuration
Every Ethernet participant must have an individual IP address. This address may not be used a second time in the same network. The IP address (see page 166) consists of 4 numbers (0 to 255). The first numbers define the network address, the other numbers define the participant's address. The IP address of the FP
1.In a "self
In this case, do not use DHCP. For further information refer to Setup of an Individual Ethernet LAN (see page 168).
2.If the FP
-Is there a
-IP address: Which fixed IP address can be assigned to the FP
-Netmask: How is the network address set up (length of the network address and/or the participant's address)?
-Gateway: What is the gateway's IP address? (0.0.0.0 if there is no gateway to be used).
36