FP | 5.2 Ethernet IP Configuration |
|
|
5.2 Ethernet IP Configuration
Every Ethernet participant must have an individual IP address. This address may not be used a second time in the same network. The IP address consists of 4 numbers (any 0 to 255, see also IP and TCP/ IP (see page 166)). The first numbers define the network address, the other numbers define the participant's address.
The IP address of the FP
1.In a "self
In many cases a class C network is used. The network is identified by 3 numbers. The participants (Computers, Units, FP
In case this network is connected to a second network via a gateway (e.g. the computer for configuration might be in this network), the gateway address also needs to be specified, e.g.:
Computer in x.y.206.z Network with Netmask 255.255.255.0, using the x.y.206.1 Gateway.
FP
-IP Add=x.y.60.31
-Netmask=255.255.255.0
-Gateway=x.y.60.1
2.In case the FP
-Is there a
-IP address: Which fixed IP address can be assigned to the FP
-Netmask: How is the network address set up (length of the network address and/ or the participant's address)?
53