FP Web-Server V2.11

15.7 Troubleshooting

 

 

4.Verify the FP Web-Server configuration in the FP Web-Configurator Tool under “Config”

If a static IP address setup should be used (private network or cross-over cable)

Check the IP address settings of your computer and the FP Web-Server configuration.

1.Under "Settings / Network Connections", open the properties dialog of the computer's Ethernet/LAN card

2.Open the “Internet Protocol (TCP/IP)” properties dialog

The “Subnet mask” setting should be the same as with your FP Web-Server configuration. Also the left part of the “IP address” (identified by the 255 value in the

173