Sending Faxes
50

Sending the same document

to pre-programmed parties

1Insert the document FACE DOWN.
LIf necessary, press {+} or {-}
repeatedly to select the desired
resolution (page 43).
2Press {BROADCAST}.
LYou can also use the navigator key.
Press {<} or {>}, then press {+} or
{-} until the following is displayed, and
press {SET}.
<BROADCAST>
SEND:PRESS SET
LThe document will be fed into the unit
and scanned into memory. The unit will
then transmit the data to each entry,
calling each number sequentially.
LAfter transmission, the stored document
will be erased automatically, and the
unit will automatically print a broadcast
sending report.
Note:
LIf you select FINE, SUPER FINE or
PHOTO resolution, the number of pages
that the unit can transmit will decrease.
LIf the document exceeds the memory
capacity, sending will be canceled.
LIf one of the entries is busy or does not
answer, it will be skipped. All skipped entries
will be redialed up to 2 times after all of the
other entries have been called.

To send the same document to more than

one party only once

You can also select the parties for each
transmission.
1. Insert the document.
2. Press {>}.
3. Press {+} or {-} until the following is
displayed.
<ONE TIME BROAD>
PRESS SET
4. Press {SET} to start programming the
entries you want to transmit to.
DIR= [00]
NAVI.[+ -] & SET
5. Press {+} or {-} until the desired entry you
want to transmit to is displayed.
Example: BILL
6543210
6. Press {SET}.
Example: DIR=BILL [01]
SEND:PRESS SET
LTo program other entries, repeat steps 5
and 6 (up to 20 entries).
7. Press {SET} to start transmission to the
programmed entries.

To cancel the broadcast setting

1. Press {STOP} while the unit displays the
following.
BROADCASTING
LThe display will show the following.
SEND CANCELED?
YES:SET/NO:STOP
2. Press {SET}.
{BROADCAST}
{<}{>}{+}{-}
{STOP}
{SET}
FACE DOWN