3. Telephone
3.4.2Editing a caller’s telephone number before calling back
1Press {CALLER ID SEARCH}.
2Press {A} or {B} repeatedly to display the desired entry.
3Press {NAME/TEL NO.} to display the telephone number.
4Press dial key (0 to 9) or {*} to enter the editing mode and edit the telephone number.
5Press {MONITOR} or lift the handset to call back the edited number.
L The unit will start dialling automatically. L To send a fax, insert the document FACE
DOWN and press {FAX START}.
Note:
LThe edited telephone number will not be saved in the caller information. To save in the directory, see page 27.
To correct a mistake
1.Press {<} or {>} to move the cursor to the incorrect number.
2.Press {STOP} to delete the number.
3.Enter the correct number.
To delete a number
Press {<} or {>} to move the cursor to the number you want to delete and press {STOP}.
To insert a number
1.Press {<} or {>} to move the cursor to the position to the right of where you want to insert the number.
2.Enter the number.
3.4.3Erasing all caller information
1Press {MENU} repeatedly to display “CALLER SETUP”.
2Press {SET}.
L “CALL LIST ERASE” will be displayed.
3Press {SET}.
LTo cancel erasing, press {STOP}, then
{MENU}.
4Press {SET}.
5Press {STOP} to exit the program.
3.4.4Erasing specific caller information
1Press {CALLER ID SEARCH}.
2Press {A} or {B} repeatedly to display the desired item.
3Press {<}.
LTo cancel erasing, press {STOP} 2 times.
4Press {SET}.
LTo erase other items, repeat steps 2 to 4.
5Press {STOP} to exit the program.
Note:
LTelstra, Optus, Telecom New Zealand and TelstraClear do not currently send caller name information.
3.5Storing caller information into the one- touch dial feature and navigator directory
LKeep the front cover page open for button locations.
Important:
LThis feature is not available in the following cases.
–The telephone number includes data other than numbers (i.e., * or #).
–The caller information does not include a telephone number.
1Press {CALLER ID SEARCH}.
2Press {A} or {B} repeatedly to display the desired item.
3Press {DIRECTORY PROGRAM}.
4Select the station key or navigator directory.
For stations
1.Press the desired station key.
2.Press {SET}.
3.Press {SET}.
For stations
1.Press the desired station key.
2.Press {SET}.
For stations
1.Press {LOWER}, then press the desired station key.
27
