Turn the two levers on the toner

Setup

6	Turn the two levers on the toner
	cartridge with firm pressure.

Levers

7	The toner cartridge is installed
	correctly when the triangles match.

8	Press down the printer cover open
	button then open the printer cover.

9	Install the drum and toner unit by
	holding the tabs.

● If the lower glass is dirty, clean it with a soft and dry cloth.

Triangles

Printer cover

Printer cover open button

Drum and toner unit

Lower glass

Caution:

Do not touch the bottom of this cover when cleaning the lower glass. It is very hot.

10 Close the printer cover by pushing down on both sides until locked.

Printer cover

Toner save feature

●If you want to save on toner consumption, set the toner save setting to on (feature #79 on page 66). The toner cartridge will last approx. 40% longer. This feature may lower the print quality.

Page 17

Image 17

Panasonic KX-FLB756AL manual Turn the two levers on the toner, Cartridge with firm pressure, Toner save feature

Contents

Model No. KX-FLB756AL Copyright For your future referenceTrademarks For Australian users Important information for Australian users InstallationService difficulties Important safety instructions Safety instructions Other Information Fuser unit Laser radiationToner cartridge Drum unit For Best Performance Included accessories AccessoriesAccessory information Model No Usage Specifications Table of Contents Using the fax machine as a scanner Using the fax machine as a printerFax sending/receiving using Multi-Function Station software Advanced features Help SET Help ButtonHelp function Overview Finding the ControlsFront view Rear view Location Connecting the document cover SetupUnlocking the shipping lock Label for unlocking Surface Toner cartridge and drum unit Cartridge with firm pressure Toner save featureTurn the two levers on the toner Paper tray Paper stacker and paper trayPaper stacker Adding paper Recording paper Connect the handset cord ConnectionsLonger, uncoiled end Telephone Handset cord line cord To use the fax machine with a computer on the same line Menu SET Setting the date and timeDate and time, your logo and fax number Recall SET Setting your logoHandset Mute Display order of characters To select characters using +orTo select characters with the dial keypad Menu Recall SET Setting your facsimile telephone numberTo delete a number Adjusting volume VolumeRinger volume Handset receiver volume Lower SET Stop Automatic DiallingStoring names and telephone numbers into one-touch dial Registered NAME= Storepress SET SET Stop Editing a stored entryErasing a stored entry To search for a name by initial Using one-touch dialUsing the directory To confirm caller information using the Caller ID list Caller ID service from your phone companyCaller ID How Caller ID is displayed Stop FAX Start Caller ID Viewing and calling back using caller informationTo display the caller’s telephone number Display while viewing Erasing caller information To cancel erasing, press , then p Press wDisplay Press w Stop SET Lower SET For navigator directory Press orStation keys Monitor REDIAL/PAUSE Scan Resolution FAX Start Using the auto document feederSending Faxes Sending a fax manually Scan Resolution Stop FAX Start Using the scanner glassTo stop transmission Sending report for confirmation Documents you can send When the paper size is set to A4When the paper size is set to Letter Lower Resolution Scan FAX Start Stop Sending a fax using one-touch dial and navigator directory Programming entries into the broadcast memory Broadcast transmissionManual Broad Broadcast Manual Broad Menu Lower SET Display Press +or -until the following is Displayed Adding a new entry into the broadcast memory Erasing a stored entry in the broadcast memory To cancel erasing, press Press w To send the same document using the scanner glass Manual Broad Stop Scan Resolution FAX Start SETTo cancel the broadcast setting Sending the same document to pre-programmed parties When receiving calls When receiving phone Setting the unit to receive faxesWhen receiving faxes Receiving Faxes Remote fax activation When receiving callsTurn Auto Answer off by pressing PQ Receiving a fax manually TEL mode Answering all calls manuallyActivating TEL mode If the FAX on light is off, turn it on by pressing Display FAX only mode All calls are received as faxesActivating FAX only mode Setting up the fax machine and an answering machine Using the unit with an answering machineSet the fax machine to the desired receiving mode p Activate the answering machine Receiving phone calls How the fax machine and answering machine workAnswering machine will record voice messages automatically Receiving faxes Extension telephone Using with the ring detection featureReceiving Faxes / Distinctive Ring Stop Resolution Copy Start Stop Copy Start ResolutionCopying Making a copy Using the scanner glass Using the auto document feederTo enlarge a document To reduce a document Connecting to a computer Setup PC To uninstall the software Installing Multi-Function Station softwareConnect the fax machine to the PC Important notice for USB cable users Activating Multi-Function Station software Setting the printer properties Using the fax machine as a printerPrinting PC Printing from Windows applications Labels Transparencies Envelopes Using Multi-Function Viewer Using the fax machine as a scannerUsing other applications Scanning PC Operating the fax machine from your computer Remote Control PC PC Fax Fax sending/receiving using Multi-Function Station software Viewing a received document Receiving a fax into your PCIf the fax machine’s memory stores a received fax document You can load the document into your PC General programming method Features SummaryProgramming How to set the basic features Basic featuresError Programming table Parallel OFFTone How to set the advanced features Advanced features Normal Australia Reports Error Messages Display Display message Cause & solution When making a copy, the document being stored exceeds You cannot change the cable type setting feature #15 onService personnel Install paper p Operations When a function does not work, check hereGeneral Fax sending Copying Receiving modeFax receiving Multi-Function Station Using an answering machine Even after clicking Cancel, scanning continues If a power failure occursRemove the document and reinsert it Multi-Function Station does not work properly New toner cartridge, shake it vertically ReplacementReplacing the toner cartridge and the drum unit Toner cartridge to snap into position Green drum surface When the recording paper has jammed in the unit Replacement / JamsRecording paper jam Waste disposal method Jams When the recording paper is not fed into the unit properly Document jams sending Jams / CleaningWhite plate and glasses White plate and scanner glass Lower glass Cleaning Document feeder rollers Reference lists and reports Printed ReportsPress or until the desired item is Press wto start printing ITU-T No Test Chart SpecificationsTechnical data about this product Paper specifications Program index Code/Feature nameIndex Index Index Page PFQX1948ZA KM0703DH0 62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan

Setup

cartridge with firm pressure.

Toner save feature