Panasonic KX-FLB756AL manual Green drum surface, Toner cartridge to snap into position

Replacement

4	Tap on the used toner cartridge several
	times to allow the remaining toner to fall
	into the drum unit. Remove the drum and	Drum and
	toner unit by holding the two tabs.
		toner unit
	● If you replace the toner cartridge and the
	drum unit at the same time, skip to step 7.

5	Turn the two levers on the used toner
	cartridge firmly.	Levers
	Used toner cartridge
		Levers
6	Pull up the right edge of the used toner	Used toner cartridge 2	1
	cartridge (#). Remove the cartridge from
	the drum unit ($).
	● The toner may stick to the cartridge and
	the drum unit. Be careful when handling.	Drum unit
	See page 7 for details.
	● Do not drop the toner on the green drum	Green drum surface

surface.

●Put the used toner cartridge into the protection bag.

7	If you replace the drum unit at the same
	time, remove the new drum unit from the
	protection bag. Remove the protection
	bar from the drum unit.
	With “Panasonic” face up on the toner
	cartridge, match the red arrows on the
	cartridge and the drum unit.
8	Slide the tab on the toner cartridge into
	the slot of the drum unit.

Hold here.

Protection bar

Red arrows

New drum unit	New toner
	cartridge Drum unit

Tab

Slot

9	Firmly press down on the right side of the
	toner cartridge to snap into position.

75