22
Setup
HANDSET MUTE
(Insert)
(Delete)
STOP
SET
MENU
Display
(Hyphen)
RECALL
1Press p.
Display:
2Press (or )until the following is
displayed.
3Press w.
4Enter your logo, up to 30 characters, using
the dial keypad. See page 23 for details.
Example: “Bill”
1. Press 22 times. Cursor
2. Press 46 times.
3. Press 56 times.
4. Press )to move the cursor to the next
space and press 56 times.
5Press w.
● The next feature will be displayed.
6Press p.
LOGO=Bill
LOGO=Bil
LOGO=Bi
LOGO=B
LOGO=
AAAAAAAAA
YOUR LOGO
PRESS SET
SYSTEM SET UP
PRESS NAVI.[IH]
Setting your logo
To correct a mistake
● Press (or )to move the cursor to the
incorrect character, and make the correction.
To delete a character
● Move the cursor to the character you want to
delete and press {.
To insert a character
1. Press (or )to move the cursor to the
position to the right of where you want to
insert the character.
2. Press FG to insert a space
and enter the character.
Note:
● You can enter your logo by pressing +or -in
step 4. In this case, press )to move the cursor
(see page 23 for details).
The logo can be your company, division or name.
To change capital or lower-case letters
Pressing the #key will change to capital or
lower-case alternatively.
1. Press 22 times.
2. Press 43 times.
3. Press #.
4. Press 53 times.
LOGO=Bil
LOGO=Bi
LOGO=BI
LOGO=B