Display message Cause & solution | Panasonic KX-FLB756AL specs

Error Messages

Display!

If the unit detects a problem, one or more of the following messages will appear on the display.

		Display message			Cause & solution

					● There is something wrong with the unit. Contact our service
		CALL SERVICE
					personnel.

					● The shipping lock is locked. Unlock the shipping lock (p. 15).
		CARRIAGE ERROR
		/			If the display messages still remain after unlocking, there is
		/
					something wrong with the carriage sensor. Contact our service
		RELEASE
		RELEASE			personnel.
		SHIPPING LOCK			personnel.
		SHIPPING LOCK

					● There is something wrong with the drum unit. Replace the drum
		CHANGE DRUM
					unit and the toner cartridge (p. 74).

					● The ADF cable is not connected correctly. Check the connection
		CHECK ADF CABLE
					(p. 15).

					● The document was not fed into the unit properly. Reinsert the
		CHECK DOCUMENT
					document. If misfeeding occurs frequently, clean the document
					feeder rollers (p. 80) and try again.

					● The drum unit is not inserted properly. Reinsert it correctly (p. 16).
		CHECK DRUM


					● The memory (telephone numbers, parameters, etc.) has been
		CHECK MEMORY			● The memory (telephone numbers, parameters, etc.) has been
					erased. Re-program.

					● The ADF cover is open. Close it.
		CLOSE ADF COVER			● The ADF cover is open. Close it.


					● The printer cover is open. Close it.
		COVER OPEN			● The printer cover is open. Close it.


					● You tried to change the cable type setting (feature #15 on page
		DATA IN MEMORY
					63), while the fax machine has a document in memory. Finish
					sending faxes, print out the document in memory (p. 44) or cancel
					the delayed transmission (feature #25 on page 64) and try again.

					● There is no space to store new entries in navigator directory.
		DIRECTORY FULL
					Erase unnecessary entries (p. 28).

					● Recording paper was not fed into the unit properly. Reinsert the
		FAILED PICK UP
					recording paper (p. 77).

					● The unit has a document in memory. See the other displayed
		FAX IN MEMORY
					message instructions to print out the document.

					● The memory is full of received documents due to a lack of
		FAX MEMORY FULL			● The memory is full of received documents due to a lack of
					recording paper or a recording paper jam. Install paper (p.19) or
					clear the jammed paper (p. 76).
					● When performing memory transmission, the document being
					stored exceeds the memory capacity of the unit. Transmit the
					entire document manually.

68

Image 68

Panasonic KX-FLB756AL manual Display message Cause & solution

Contents

Model No. KX-FLB756AL Copyright For your future referenceTrademarks For Australian users Important information for Australian users InstallationService difficulties Safety instructions Important safety instructions Other Information Laser radiation Fuser unitToner cartridge Drum unit For Best Performance Accessories Included accessoriesAccessory information Model No Usage Specifications Table of Contents Using the fax machine as a printer Using the fax machine as a scannerFax sending/receiving using Multi-Function Station software Advanced features Help SET Help ButtonHelp function Finding the Controls OverviewFront view Rear view Location Setup Connecting the document coverUnlocking the shipping lock Label for unlocking Toner cartridge and drum unit Surface Cartridge with firm pressure Toner save featureTurn the two levers on the toner Paper tray Paper stacker and paper trayPaper stacker Recording paper Adding paper Connections Connect the handset cordLonger, uncoiled end Telephone Handset cord line cord To use the fax machine with a computer on the same line Menu SET Setting the date and timeDate and time, your logo and fax number Recall SET Setting your logoHandset Mute Display order of characters To select characters using +orTo select characters with the dial keypad Menu Recall SET Setting your facsimile telephone numberTo delete a number Volume Adjusting volumeRinger volume Handset receiver volume Lower SET Stop Automatic DiallingStoring names and telephone numbers into one-touch dial Registered NAME= Storepress SET SET Stop Editing a stored entryErasing a stored entry To search for a name by initial Using one-touch dialUsing the directory Caller ID service from your phone company To confirm caller information using the Caller ID listCaller ID How Caller ID is displayed Viewing and calling back using caller information Stop FAX Start Caller IDTo display the caller’s telephone number Display while viewing To cancel erasing, press , then p Press w Erasing caller informationDisplay Press w Stop SET Lower SET For navigator directory Press orStation keys Using the auto document feeder Monitor REDIAL/PAUSE Scan Resolution FAX StartSending Faxes Sending a fax manually Using the scanner glass Scan Resolution Stop FAX StartTo stop transmission Sending report for confirmation Documents you can send When the paper size is set to A4When the paper size is set to Letter Sending a fax using one-touch dial and navigator directory Lower Resolution Scan FAX Start Stop Broadcast transmission Programming entries into the broadcast memoryManual Broad Broadcast Manual Broad Menu Lower SET Adding a new entry into the broadcast memory Display Press +or -until the following is Displayed To cancel erasing, press Press w Erasing a stored entry in the broadcast memory Manual Broad Stop Scan Resolution FAX Start SET To send the same document using the scanner glassTo cancel the broadcast setting Sending the same document to pre-programmed parties Setting the unit to receive faxes When receiving calls When receiving phoneWhen receiving faxes Receiving Faxes Remote fax activation When receiving callsTurn Auto Answer off by pressing PQ Receiving a fax manually TEL mode Answering all calls manuallyActivating TEL mode If the FAX on light is off, turn it on by pressing Display FAX only mode All calls are received as faxesActivating FAX only mode Using the unit with an answering machine Setting up the fax machine and an answering machineSet the fax machine to the desired receiving mode p Activate the answering machine How the fax machine and answering machine work Receiving phone callsAnswering machine will record voice messages automatically Receiving faxes Extension telephone Using with the ring detection featureReceiving Faxes / Distinctive Ring Stop Copy Start Resolution Stop Resolution Copy StartCopying Making a copy Using the auto document feeder Using the scanner glassTo enlarge a document To reduce a document Setup PC Connecting to a computer Installing Multi-Function Station software To uninstall the softwareConnect the fax machine to the PC Important notice for USB cable users Activating Multi-Function Station software Using the fax machine as a printer Setting the printer propertiesPrinting PC Printing from Windows applications Transparencies Labels Envelopes Using the fax machine as a scanner Using Multi-Function ViewerUsing other applications Scanning PC Remote Control PC Operating the fax machine from your computer Fax sending/receiving using Multi-Function Station software PC Fax Receiving a fax into your PC Viewing a received documentIf the fax machine’s memory stores a received fax document You can load the document into your PC General programming method Features SummaryProgramming Basic features How to set the basic featuresError Programming table Parallel OFFTone Advanced features How to set the advanced features Normal Australia Error Messages Reports Display message Cause & solution Display You cannot change the cable type setting feature #15 on When making a copy, the document being stored exceedsService personnel Install paper p When a function does not work, check here OperationsGeneral Fax sending Copying Receiving modeFax receiving Using an answering machine Multi-Function Station If a power failure occurs Even after clicking Cancel, scanning continuesRemove the document and reinsert it Multi-Function Station does not work properly New toner cartridge, shake it vertically ReplacementReplacing the toner cartridge and the drum unit Green drum surface Toner cartridge to snap into position Replacement / Jams When the recording paper has jammed in the unitRecording paper jam Waste disposal method When the recording paper is not fed into the unit properly Jams Jams / Cleaning Document jams sendingWhite plate and glasses White plate and scanner glass Cleaning Lower glass Document feeder rollers Printed Reports Reference lists and reportsPress or until the desired item is Press wto start printing ITU-T No Test Chart SpecificationsTechnical data about this product Paper specifications Program index Code/Feature nameIndex Index Index Page 62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan PFQX1948ZA KM0703DH0