Panasonic KX-FLB756AL manual Australia

Features Summary

Code		Feature & Display		Settings	How the unit operates
		Setting the original mode		NORMAL	“NORMAL”: Used for normal
					writing.
		ORIGINAL
					“LIGHT”: Used for faint writing.
		=NORMAL	[±]
#58					“DARKER”: Used for dark writing.
	To send or copy a document with			LIGHT
		faint or dark writing, set this feature
		before starting transmission or		DARKER
		copying.
		Setting the Error Correction			This feature is available when the
		Mode (ECM)		ON	transmitting/receiving stations are
					ECM compatible.
#68		ECM SELECTION
		=ON	[±]
		To send a fax even if there is static		OFF
		interference on the telephone line.
	Setting the location where you				“AUSTRALIA”:To use in Australia
	use this unit			AUSTRALIA	“NEW ZEALAND”:To use in New
					Zealand
#74		LOCATION
		=AUSTRALIA	[±]
		This setting must match your		NEW ZEALAND
		location.
	Setting the connecting tone				You can confirm the status of the
					other party’s machine.
		CONNECTING	TONE	ON
					● If the ring back tone continues, the
		=ON	[±]
					other party’s machine may not be
#76	If you often have trouble when
					a facsimile or may have run out of
	sending a fax, this feature allows
					paper. Check with the other party.
	you to hear connecting tones: fax			OFF
					● The connecting tone volume
	tone, ring back tone and busy tone.
					cannot be adjusted.
		Saving on toner consumption		ON	“ON”:The toner cartridge will last
					longer.
#79		TONER SAVE
			[±]		● This feature may lower the print
		=OFF		OFF
					quality.
	Resetting advanced features to			YES	1. Follow steps 1 and 2 on page 64.
	their default settings				2. Press +or -to select “YES”.
#80					3. Press w.
		SET DEFAULT
		RESET=NO	[±]	NO	4. Press wagain.
					5. Press p.

66