Laser radiation, Fuser unit, Drum unit | Panasonic KX-FLB756AL

Safety instructions

CAUTION:

Laser radiation

●The printer of this unit utilises a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

1

Fuser unit

Caution:

Do not touch the bottom of this cover. It is very hot.

Fuser unit

●The fuser unit is inside of the unit and gets hot. Do not touch it when removing the jammed paper or cleaning the lower glass.

Toner cartridge

●Be careful of the following when you handle the toner cartridge:

—Do not leave the toner cartridge out of the protection bag for a long time. It will decrease the toner life.

—If you ingest any toner, drink several glasses of water to dilute your stomach contents, and seek immediate medical treatment.

—If any toner comes into contact with your eyes, flush them thoroughly with water, and seek medical treatment.

—If any toner comes into contact with your skin, wash the area thoroughly with soap and water.

—If you inhale any toner, move to an area with fresh air and consult local medical personnel.

Drum unit

●Read the instructions on pages 16 and 17 before you begin installation of the drum unit. After you have read them, open the drum unit protection bag. The drum unit contains a photosensitive drum. Exposing it to light may damage the drum.

Once you have opened the protection bag:

—Do not expose the drum unit to light for more than 5 minutes.

—Do not touch or scratch the green drum surface.

—Do not place the drum unit near dust or dirt, or in a high humidity area.

—Do not expose the drum unit to direct sunlight.

Static electricity

●To prevent static electricity damage to the interface connectors (parallel and USB), ADF jack or other electrical components inside the unit, touch a grounded metal surface, such as the metal part under the parallel interface connector before touching the components.

Metal part

7

Image 7

Panasonic KX-FLB756AL manual Laser radiation, Fuser unit, Toner cartridge, Drum unit, Static electricity

Contents

Model No. KX-FLB756AL Trademarks For your future referenceCopyright For Australian users Service difficulties InstallationImportant information for Australian users Important safety instructions Safety instructions Other Information Drum unit Laser radiationFuser unit Toner cartridge For Best Performance Model No Usage Specifications AccessoriesIncluded accessories Accessory information Table of Contents Advanced features Using the fax machine as a printerUsing the fax machine as a scanner Fax sending/receiving using Multi-Function Station software Help function Help ButtonHelp SET Rear view Finding the ControlsOverview Front view Location Label for unlocking SetupConnecting the document cover Unlocking the shipping lock Surface Toner cartridge and drum unit Turn the two levers on the toner Toner save featureCartridge with firm pressure Paper stacker Paper stacker and paper trayPaper tray Adding paper Recording paper To use the fax machine with a computer on the same line ConnectionsConnect the handset cord Longer, uncoiled end Telephone Handset cord line cord Date and time, your logo and fax number Setting the date and timeMenu SET Handset Mute Setting your logoRecall SET To select characters with the dial keypad To select characters using +orDisplay order of characters To delete a number Setting your facsimile telephone numberMenu Recall SET Handset receiver volume VolumeAdjusting volume Ringer volume Storing names and telephone numbers into one-touch dial Automatic DiallingLower SET Stop Registered NAME= Storepress SET Erasing a stored entry Editing a stored entrySET Stop Using the directory Using one-touch dialTo search for a name by initial How Caller ID is displayed Caller ID service from your phone companyTo confirm caller information using the Caller ID list Caller ID Display while viewing Viewing and calling back using caller informationStop FAX Start Caller ID To display the caller’s telephone number Stop SET To cancel erasing, press , then p Press wErasing caller information Display Press w Station keys For navigator directory Press orLower SET Sending a fax manually Using the auto document feederMonitor REDIAL/PAUSE Scan Resolution FAX Start Sending Faxes Sending report for confirmation Using the scanner glassScan Resolution Stop FAX Start To stop transmission When the paper size is set to Letter When the paper size is set to A4Documents you can send Lower Resolution Scan FAX Start Stop Sending a fax using one-touch dial and navigator directory Broadcast Manual Broad Menu Lower SET Broadcast transmissionProgramming entries into the broadcast memory Manual Broad Display Press +or -until the following is Displayed Adding a new entry into the broadcast memory Erasing a stored entry in the broadcast memory To cancel erasing, press Press w Sending the same document to pre-programmed parties Manual Broad Stop Scan Resolution FAX Start SETTo send the same document using the scanner glass To cancel the broadcast setting Receiving Faxes Setting the unit to receive faxesWhen receiving calls When receiving phone When receiving faxes Turn Auto Answer off by pressing PQ When receiving callsRemote fax activation Activating TEL mode TEL mode Answering all calls manuallyReceiving a fax manually Activating FAX only mode FAX only mode All calls are received as faxesIf the FAX on light is off, turn it on by pressing Display Activate the answering machine Using the unit with an answering machineSetting up the fax machine and an answering machine Set the fax machine to the desired receiving mode p Receiving faxes How the fax machine and answering machine workReceiving phone calls Answering machine will record voice messages automatically Receiving Faxes / Distinctive Ring Using with the ring detection featureExtension telephone Making a copy Stop Copy Start ResolutionStop Resolution Copy Start Copying To reduce a document Using the auto document feederUsing the scanner glass To enlarge a document Connecting to a computer Setup PC Important notice for USB cable users Installing Multi-Function Station softwareTo uninstall the software Connect the fax machine to the PC Activating Multi-Function Station software Printing from Windows applications Using the fax machine as a printerSetting the printer properties Printing PC Labels Transparencies Envelopes Scanning PC Using the fax machine as a scannerUsing Multi-Function Viewer Using other applications Operating the fax machine from your computer Remote Control PC PC Fax Fax sending/receiving using Multi-Function Station software You can load the document into your PC Receiving a fax into your PCViewing a received document If the fax machine’s memory stores a received fax document Programming Features SummaryGeneral programming method Programming table Basic featuresHow to set the basic features Error Tone OFFParallel How to set the advanced features Advanced features Normal Australia Reports Error Messages Display Display message Cause & solution Install paper p You cannot change the cable type setting feature #15 onWhen making a copy, the document being stored exceeds Service personnel Fax sending When a function does not work, check hereOperations General Fax receiving Receiving modeCopying Multi-Function Station Using an answering machine Multi-Function Station does not work properly If a power failure occursEven after clicking Cancel, scanning continues Remove the document and reinsert it Replacing the toner cartridge and the drum unit ReplacementNew toner cartridge, shake it vertically Toner cartridge to snap into position Green drum surface Waste disposal method Replacement / JamsWhen the recording paper has jammed in the unit Recording paper jam Jams When the recording paper is not fed into the unit properly White plate and scanner glass Jams / CleaningDocument jams sending White plate and glasses Lower glass Cleaning Document feeder rollers Press wto start printing Printed ReportsReference lists and reports Press or until the desired item is Technical data about this product SpecificationsITU-T No Test Chart Paper specifications Index Code/Feature nameProgram index Index Index Page PFQX1948ZA KM0703DH0 62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan