Receiving Faxes
FAX ONLY mode!
(all calls are received as faxes)
Activating the FAX ONLY mode
If the arrow (▼) is not shown on the right of the display, turn it on by pressing AUTO ANSWER .
●The display will show the current number of rings before the unit answers a call in the FAX ONLY mode.
Display: PICKUP & RCV FAX
| AFTER | 3 RINGS |
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
● If necessary, rotate JOG DIAL | until the desired | |||||||
ring count is displayed and press | SET . | |||||||
|
|
|
|
|
|
|
|
|
|
|
| ▼ |
| ||||
|
|
|
|
|
|
|
|
|
|
|
| ON |
●When receiving calls, the unit will automatically answer all calls and only receive fax documents.
Note:
Display
JOG DIAL
SET
AUTO ANSWER
●If the arrow (▼) is already shown on the right of the display and you wish to change the ring count, turn
the arrow off once then on again by pressing AUTO ANSWER and follow the instructions above.
●This mode should not be used with a telephone line which is used for both voice and fax calls. Fax communication will be attempted even if someone is trying to call you.
If you have a telephone line just for faxes, we recommend the following setup.
Example: One telephone line is used for voice calls and a separate telephone line for faxes.
Line 1 – Voice calls
Line 2 – Fax calls
Only a fax machine is connected.
45