Panasonic KX-HCM8 operating instructions Isp, Network window on

Models: KX-HCM8

1 118
Download 118 pages 29.48 Kb
Page 107
Image 107

 

Operating Instructions

 

About Network Camera Setup

 

 

Problem

Cause and Remedy

 

 

Power Indicator

• Internal Failure of the server or the congestion on the network

continues

traffic when using DHCP may prevent Network Camera from

blinking.

getting the IP address. Ask the network administrator or your

 

ISP.

 

• Power Indicator blinks when updating firmware on page 82.

 

When the Update Firmware failed, refer to page 108.

 

• If you cannot access Network Camera, the Network Camera

 

hardware may be defective. Call our customer call center.

 

 

Image Transfer

• Default Gateway and DNS server address should be set up on

on e-mail or FTP

Network window on page 50.

does not work.

• If FTP does not work properly, ask your ISP or network

 

 

administrator about the transferring mode of FTP server.

 

[Passive Mode] or [Active Mode] is available.

 

• Select [One Time] for Login Timing when transferring images

 

by FTP in short duration time.

 

 

Timer mode

Short interval of Image Buffer Frequency makes Network Camera

transfers older

transfer the older images. Set the interval long enough to transfer

images.

the images. Buffered Image screen enables you to check this

 

setting.

 

 

[For assistance, please call: 1-800-272-7033]

107

Page 107
Image 107
Panasonic KX-HCM8 operating instructions Isp, Network window on