Important Safety Instructions | Panasonic KX-HCM8 guide

Operating Instructions

IMPORTANT SAFETY INSTRUCTIONS

When using this unit, basic safety precautions should always be followed to reduce the risk of fire, electric shock, or personal injury.

1.Read and understand all instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.After taking away the dust on the Fixed Focus Lens, wipe the Fixed Focus Lens with lens cleaning paper.

6.Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce heat.

7.Protect the AC adaptor cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the unit.

8.Only use attachments/accessories such as stands, tripods, and brackets specified by the manufacturer.

9.Do not touch the unit or the AC adaptor during lightning storms.

10.Unplug the unit when unused for long periods of time.

11.Refer all servicing to qualified service personnel. Servicing is required when the unit has been damaged in any way, such as AC adaptor cord or plug is damaged, the unit does not operate normally, or has been dropped.

SAVE THESE INSTRUCTIONS

4

Image 4

Panasonic KX-HCM8 operating instructions Important Safety Instructions

Contents

Network Camera Introduction For operation assistance Call Trademarks Network Camera Memo Important Safety Instructions Table of Contents Technical Guides Specification and TroubleshootingIndex 115 Section Main Features Getting to Know Network Camera Authentication Update FirmwareMulti-Language Display System Requirements Authentication-System Security Feature Authentication window Included Accessories Setup CD-ROM Camera Feature Locations Front View Rear View Bottom View Network Camera Setup Installation Procedure Network Camera Configuration Type Type 2-Internet Connection with a Broadband Router Type 3-Internet Direct Connection with a Modem Type 4-Direct Connection with a PC How to turn on Network Camera for Installation Preparing the Network Parameters for Network Camera Network ParametersNetwork parameters memo for Network Camera Network Camera Configuration Type Port No DefaultNetwork Parameters Table IP address How to refer the network parameters from the PC Enter winipcfg and click OK. IP configuration window appears Setting IP Address of the PC in Type 4 Configuration Type Private IP address Proxy Server Setting Operating Instructions Simple Installation using the Setup CD-ROM Operating Instructions Operating Instructions Click the language to change the display Network Camera Access from the Internet Port Forwarding IP Masquerade feature Top If Top Page does not appear Operating Instructions Network Camera Screen and Setup Window Network Camera Flow Chart Example TopHttp//Global IP address of Broadband RouterPortNo Top Motion Jpeg Single CameraMulti-Camera Help ActiveX Controls Single Camera Screen Using Operation Bar Non Transfer mode Alarm/Timer mode Viewing Buffered Image Screen Viewer Clicking Start CapturePrimary Secondary Multi-Camera Screen Setup Setup Administrator Camera SetupGo to Top Name/Time This option first. Refer to Entered. If any operational issues are changed, tryFunctions of Network Camera Go to Top Network Instructions for the data fields Enter only the number Dhcp Ddns File size of the image Name/Time CameraName Date Adjustment Time Changed AM/PM or 24HAuto Time Zone Security Administrator Click Security Administrator on Setup For Setup Password EnableRetype Click Security General User on Setup Security General User Delete or Modify User ID ListNew User Top View Image Resolution Instructions for the data fields TopImage 160 x Image Quality Image Transfer Non Transfer mode Transfer in the Alarm Mode Click Alarm on Image Transfer window Sets the image resolution and image quality Alarm enable conditionActive Time of Trigger Login timing Over write setting Data transfer method Setting Example Setting explanation Transfer in the Timer Mode Buffers or transfers by the timer trigger Login timing Over write setting Camera Setup Power Line White BalanceFixed Indoor Fixed Multi-Camera Enable check box IP Address orURL * 1 or Host Camera Name Click External Output Control on Setup External Output Control Indicator Control Status Restart Click Restart Now Update Firmware Click Update Firmware Operating Instructions Reset to Factory Default Click Reset to Factory Default on Setup Click Execute Technical Guides Flexible Stand Mounting MountingTripod Mounting Wall Mounting Ceiling Mounting Power Indicator On the Stand On the wall On the ceiling Top Interfacing to the External I/O Explanation of External I/OPin Function External Sensor Input Circuit Diagram Example Ascii and ISO-8859-1 Character Table Unavailable character set Displayable character set Maintenance Specification and Troubleshooting Network Camera Reset Procedure-Default Settings Default Settings List Items Factory Default Indispensable setting Value Network Image Transfer 100 For assistance, please call 101 Items Factory Default Indispensable setting Value Camera Network Camera Specifications Description SpecificationsOther Specification Description SMTP, FTP About Network Camera Setup TroubleshootingProblem Cause and Remedy For Indicator Control window ISP Network window on About Network Camera Setup Problem Cause and Remedy About Top View Image screen View Image Setting window on About Other Troubles Confirmation of Network Camera Operation Click the language to change the display FCC and Other Information 114 Index Operating Instructions TCP/IP For product service When you ship the product