Operating Instructions
3.3.2Viewing Buffered Image Screen
Buffered Image screen can be viewed by clicking [Viewer] on the operation bar. Buffered Image is saved in the internal memory of Network Camera by clicking [Start Capture]. Alarm/Timer mode in the Image Transfer on page 62 can also buffer the image. Buffered Image is erased by power off, restarting, Update Firmware, resetting to Factory Default and when Image Transfer or Name/Time window is saved and clicking [Start Capture].
The image number, date and time are displayed.
(The example shows 12h 0min 0s 000ms on January 1st, 2003)
[Play]
The buffered images are displayed continuously.
[<Prev] & [Next>]
The previous image or next image is displayed.
[<10] & [10>]
The 10th image before or after the image is displayed.
[<100] & [100>]
The 100th image before or after the image is displayed.
Operation bar of the Single Camera screen changes in the Image Transfer mode. [Start Capture] and [Viewer] are displayed in the Non Transfer mode. [Primary] and [Secondary] are displayed in the Alarm/Timer mode.
Refer to page 62 about the Image Transfer feature.
Non Transfer mode
Alarm/Timer mode
42
