Operating Instructions
2.4Network Parameters
2.4.1Preparing the Network Parameters for Network Camera
Before starting to set up the network parameters of Network Camera, make note of corresponding network parameters.
[Type 1] Ask your network administrator for the network parameters.
[Type 2] Refer to the broadband router’s manual for the network parameters.
[Type 3] Ask your ISP (Internet Service Provider) for the network parameters.
[Type 4] Install Network Camera in the default condition. Set the PC "192.168.0.250" (IP address) and "255.255.255.0" (Subnet Mask). Refer to page 24.
Refer to page 22 and page 23 for network parameters.
Network parameters memo for Network Camera
The devices on the network may not be assigned the same IP address. Each device must have its own IP address. Overlapped IP addresses can cause other network devices to stop working and may result in widespread network problems.
IP Address | . | . | . |
Default Gateway | . | . | . |
|
|
|
|
Subnet Mask | . | . |
| . |
DNS Server 1 |
| . | . | . |
DNS Server 2 | . | . | . |
[For assistance, please call: | 21 |
