Operating Instructions
3.5.11 Indicator Control
Indicator Control window allows you to select Power Indicator operation. Power Indicator operation has three patterns.
•Always on
•Turns on when accessing Network Camera
•Always off
Notes
•Power Indicator can be controlled in case the administrator does not want to draw attention to Network Camera. This may be desirable when used for security applications.
•Indicator Control window cannot control Ethernet Indicator on page 15.
1.Click [Indicator Control] on Setup Page.
2.Select the Power Indicator on/off. Click [Save] when finished.
•Click [Cancel] to quit the current settings. The window returns to Setup Page without saving the parameters.
[For assistance, please call: | 79 |
