11.1.3 TAM features
Feature/Code Selection
Selecting the voice prompt
MBNM1NM1NM2N
The voice guidance will be heard in the selected language.
M1N “ENGLISH” (default): English is used.
M2N “SPANISH”: Spanish is used.
Changing the maximum
recording time for incoming
messages*1
MBNM3NM0NM5N
M1N “1 MINUTE”
M2N “GREET ONLY”: The unit plays the greeting message but does not record
any incoming messages.
M3N “3 MINUTES” (default)
Note:
RYou can also program this feature with the cordless handset (feature #305
on page 76) (KX-MB2060 optional).
Setting the remote operation
ID*1
MBNM3NM0NM6N
1. MMenuN A MBNM3NM0NM6N
2. To activate the remote operation feature, enter a 3-digit remote operation
ID.
RThe default setting is “111”.
RTo deactivate the remote operation feature, press MGN.
3. MSetN A MMenuN
Note:
RYou can also program this feature with the cordless handset (feature #306
on page 76) (KX-MB2060 optional).
Screening the incoming call
MBNM3NM1NM0N
To hear an incoming call from the speaker when the answering machine is
recording the message.
M0N “OFF”
M1N “ON” (default)
Changing the greeting
message time for TAM/FAX
MBNM3NM1NM5N
M1N “16s” (default): Maximum greeting message time is 16 seconds.
M2N “60s”: Maximum greeting message time is 60 seconds.
See page 69 for details.
Receiving a voice message
into the computer
MBNM3NM6NM5N
If you wish to receive a voice message into a computer, activate this feature.
M0N “OFF” (default): Deactivate this feature.
M1N “ALWAYS”: If the unit recognizes the connection to the computer, it will
transfer recorded voice message to the computer. If the unit cannot recognize
the connection, it will store the voice message into memory, and then transfer
the data after recognition of the computer connection.
Setting the computer for PC
TAM reception
MBNM3NM6NM6N
To select the computer that will be used for receiving a voice message. See
page 30 for details.
Setting the web voice
playback mode
MBNM3NM6NM7N
See page 73 for details.
Setting the web voice
playback access code
MBNM3NM6NM8N
See page 73 for details.
Setting the TAM to email
address
MBNM3NM6NM9N
If you wish to transfer an incoming voice message to desired email address,
activate this feature.
M0N “OFF” (default): Deactivate this feature.
M1N “ON”: If you set the email destinations beforehand (page 89), the incoming
voice message will be automatically transferred as an email attachment to the
desired address. Memo recording (page 69) and conversation recording
(page 69) will not be transferred.
88
11. Programmable Features