5.1 Making a copy

5.1.1 Using the scanner glass

MAuto AnswerN
MResolutionN
MContrastNMStopNMStartN
MSetNMCNMDNMEN
MCopy SizeN
MCopyN
1If the MCopyN light is OFF, turn it ON by pressing
MCopyN.
2Set the original (page 25).
3If necessary, change the copy size (original
document size and recording paper size), resolution
and contrast according to the type of document.
RTo select the copy size, see page 42.
RTo select the resolution, see page 42.
RTo select the contrast, see page 42.
4If necessary, enter the number of copies (up to 99).
5MStartN
RThe unit will start copying.
6After you finish copying, press MStopN to reset the
settings you set in step 3 and 4.
Note:
RTo stop copying, see page 108.
RYou can change the default operation mode (feature
#463 on page 81) and the timer before returning to
the default operation mode (feature #464 on
page 81).
RIf the MAuto AnswerN light is ON, the unit can receive
faxes automatically even when in the copy mode.
To select the copy size
1. Press MCopy SizeN repeatedly to select “ORIGINAL
SIZE”.
2. Press MCN or MDN repeatedly to select the size of your
original document. A MSetN
3. Press MCN or MDN repeatedly to select the size of
recording paper size.
RWhen “#2” is selected, you can change the
recording paper size by pressing MEN repeatedly.
RThe appropriate zoom rate will be set
automatically. Some copying features cannot be
used during zoom copy. See page 43 for
details.
4. MSetN
To select the resolution
1. Press MResolutionN repeatedly.
–“TEXT/PHOTO”: For both text and photographs.
–“TEXT”: For text only.
–“PHOTO”: For photographs, shaded drawings,
etc.
2. MSetN
Note:
RYou can change the default resolution (feature #461
on page 90).
To select the contrast
Adjust this setting depending on the darkness or
lightness of the document. 5 levels (low to high) are
available.
Press MContrastN repeatedly. A MSetN
Note:
RYou can hold the previous contrast setting (feature
#462 on page 81).
42
5. . Copier
5. Copier