14.3.6 Caller ID
Problem Cause & Solution
Caller information is not
displayed.
RYou must subscribe to a Caller ID service. Contact your service provider/
telephone company for details.
RIf your unit is connected to any additional telephone equipment such as a
Caller ID box or cordless telephone line jack, plug the unit directly into the
wall jack.
RIf you use a DSL/ADSL service, we recommend connecting a DSL/ADSL
filter between the base unit and the telephone line jack. Contact your DSL/
ADSL provider for details.
RThe name display service may not be available in some areas. Contact your
service provider/telephone company for details.
ROther telephone equipment may be interfering with this unit. Disconnect the
other equipment and try again.
ROther electrical appliances connected to the same outlet may be interfering
with the Caller ID information.
RTelephone line noise may be affecting the Caller ID information.
RThe caller requested not to send his/her information (page 54).
RIf a call is being transferred to you, the caller information will not be
displayed.
Time on the unit has shifted. RIncorrect time information from incoming Caller ID changes the time. Set the
time adjustment to “MANUAL” (OFF) (feature #226 on page 80).
14.3.7 Cordless handset (KX-MB2060 optional)
Problem Cause & Solution
The cordless handset does
not turn on even after
installing charged batteries.
RPlace the cordless handset on the charger to turn ON the cordless handset.
The cordless handset does
not work.
RMake sure that the batteries are installed correctly (page 19) and fully charge
them (page 22).
RFully charge the batteries (page 22).
RCheck the connections (page 21).
RClean the charge contacts and charge again (page 22).
RRemove the batteries from the cordless handset, and then insert the
batteries into the cordless handset again.
RCheck that power cord is connected properly, and power switch of the base
unit is ON (page 23).
RThe cordless handset has not been registered to the base unit. Register the
cordless handset (feature #130 on page 104).
The cordless handset will not
turn ON.
RMake sure that the batteries are installed correctly (page 19).
RFully charge the batteries (page 22).
RClean the charge contacts and charge again (page 22).
The display is in a language I
cannot read.
RChange the cordless handset display language (feature #110 on
page 103).
is displayed. RThe cordless handset is not registered to the base unit. Register it (feature
#130 on page 104).
RThe cordless handset is too far from the base unit. Move closer.
RCheck that power cord is connected properly, and power switch of the base
unit is ON (page 23).
The cordless handset does
not ring.
RThe ringer volume is turned OFF. Adjust it (page 27).
RSilent mode is turned ON. Turn it OFF (feature #238 on page 51).
120 For assistance, please visit http://www.panasonic.com/help
14. Help