Display Cause & Solution
“REMOVE PAPER IN INPUT
TRAY #2”
RThe recording paper is installed in the manual input tray when trying to
receive faxes or print reports. Remove the recording paper from manual
input tray.
“REPLACE DRUM CHANGE
SUPPLIES”
RThe drum cartridge’s service life is finished. Replace the drum cartridge and
the toner cartridge immediately.
“RX MEMORY FULL”RThe memory is full of received documents due to a lack of recording paper
or a recording paper jam. Load paper (page 16) or remove the jammed
paper (page 126).
RIf the PC fax (feature #442 on page 86) is set to “ALWAYS”,
– check the connection between the computer and the unit.
– check that the computer is turned ON.
RIf the fax preview mode (feature #448 on page 66) is set to “ON”,
– view, print or save the received fax documents using the web browser
on the computer connected via the LAN, and then erase the
unnecessary documents (page 66).
– turn the setting to “OFF”. The fax documents stored in memory will be
printed automatically.
“SCANNER POSITION
ERROR”
RThere is something wrong with the scanner position. Turn the power switch
OFF, then ON. If the problem cannot be solved, contact our service
personnel.
“SERIAL ERROR”RThere is something wrong with the unit. Contact our service personnel.
“SUBSCRIBE TO CALLER ID”RYou must subscribe to use Caller ID service. Contact your service provider/
telephone company for service availability. Once you receive caller
information, this message will not be displayed.
“TONER EMPTY”
“CHANGE SUPPLIES”
RThe toner is empty. Replace the toner cartridge immediately.
“TONER LOW”
“CHANGE SUPPLIES”
RThe toner is reaching the end of its life. You will need to replace the toner
cartridge soon.
“TOP COVER OPEN”RThe top cover is open. Close it.
“TRANSMIT ERROR”RA transmission error occurred. Try again.
14.2.2 Cordless handset (KX-MB2060 optional)
Display Cause & Solution
“Base no power”
or
“No link. Re-connect
base AC adaptor.”
RThe cordless handset has lost communication with the base unit. Move
closer to the base unit and try again.
RTurn the base unit’s power switch OFF to reset the unit. Turn the power
switch ON and try again.
RThe cordless handset’s registration may have been canceled. Re-register
the cordless handset (feature #130 on page 104).
“Busy”RThe called unit is in use.
ROther units are in use and the system is busy. Try again later.
RThe cordless handset you are using is too far from the base unit. Move closer
and try again.
“Call phone company for
your access #”
RYou have not stored the voice mail access number. Store the number
(page 101).
“Error!!”RRecording was too short. Try again.
“Invalid”RThere is no cordless handset registered to the base unit matching the
cordless handset number you entered.
RThe cordless handset is not registered to the base unit. Register the cordless
handset (feature #130 on page 104).
112 For assistance, please visit http://www.panasonic.com/help
14. Help