4.1.7 Scan to SMB folder (LAN connection

only)
You can send the scanned image to a folder on the
network.
Important:
RProgram the SMB folder settings beforehand
(page 93).
1Set the original (page 25).
2MScanN
3Press MCN or MDN repeatedly to select “SMB
FOLDER”. A MSetN
4Press MCN or MDN repeatedly to select the folder to
which you want to send the scanned image. A
MSetN
5If necessary, change the scanning settings. Press
MEN, press MCN or MDN repeatedly to select the desired
setting. A MSetN
RIf you want to scan several pages and save as a
single file, select PDF as the file format.
6When using the scanner glass:
MStartN A The unit will scan 1 page. Place the next
document on the scanner glass and press MSetN.
Repeat this until all the documents are scanned, then
press MStartN.
When using the automatic document feeder:
MStartN
RThe scanned image will be automatically saved
in the selected folder on the network.
7After you finish scanning, press MStopN to reset the
settings you set in step 5.
Note:
RTo stop scanning, see page 108.
RYou can save the images in TIFF, JPEG or PDF
formats.
RIf this function does not perform properly, consult
your network administrator. This unit’s SMB function
does not support NTMLv2 and SMB signatures.
4.2 Scanning from a computer(Pull Scan)
Note:
RWhen scanning a document, we recommend using
the scanner glass rather than the automatic
document feeder for better results.
RDo not open the document cover when scanning a
document with the automatic document feeder.

4.2.1 Using Multi-Function scan application

By clicking an application icon, the selected application
starts automatically after scanning.
1Set the original (page 25).
2Start Multi-Function Station. A [Scan]
3Click the desired application icon.
RWhen you click [Custom], the pre-programmed
application starts.
RTo cancel scanning while the documents are
being scanned, click [Cancel].
Note:
RYou can change the scanning settings beforehand for
each application (page 34).
RWhen you point to an application icon, the scanning
settings for that application are displayed as a tooltip.
RThe scanned image will be automatically saved in the
folder selected in the [Settings] window (page 34).

4.2.2 Using Multi-Function Viewer

1Set the original (page 25).
2Start Multi-Function Station.
3[Utilities] A [Viewer]
R[Multi-Function Viewer] will appear.
4Click the [Scan] icon in the [Multi-Function
Viewer] window.
RThe unit’s name dialog box will appear.
5If necessary, change the scanning settings on your
computer.
RTo preview the scanned image, click [Preview].
You can drag the frame to specify the scanning
area. If you change the scan settings, click
[Preview] to refresh the scanned image.
If you use the automatic document feeder, only
the first page will be previewed. When you need
to refresh the scanned image, set the document
to preview again.
6[Scan]
RIf you preview the scanned image using the
automatic document feeder in step 5, set the
document again and click [Scan].
RThe scanned image will be displayed in the
[Multi-Function Viewer] window after scanning.
40
4. Scanner