1.3 Telephone Features

To cancel all message waiting indications left at your extension

PT/SLT

 

7

0

0

C.Tone

 

 

D.Tone

 

 

 

Off-hook.

Enter 70.

Enter 0.

Enter #.

On-hook.

 

 

 

 

An SLT user can enter "0"

 

 

 

 

 

instead of "#".

 

• The MESSAGE button light or Message/Ringer Lamp shows the current status as follows: Off: No messages

Red on: New messages.

The display shows messages in the order received, starting with the selected message.

<Example>

56781234

The MESSAGE button is used to perform operations and display notifications from both the Message Waiting and Built-in Voice Message (BV) features. If a message has also been left in a voice message area, "Voice Message" will be shown on a display PT when the MESSAGE button is pressed. Refer to "1.3.7 Built-in Voice Message (BV)".

Each extension can have a maximum of 8 messages waiting when using the Message Waiting feature, or a maximum of 125 voice messages waiting when using the BV feature.

If you go off-hook with a single line telephone (SLT) that has messages waiting, a special dial tone (dial tone 3) will be heard. You can call a caller back or listen to the message by entering the Message Waiting Answer feature number, "784# (7840)".

Programming Manual References

[PT Programming]

[619] SLT Message Waiting

[PC Programming]

9.2.1 Main [2-1]—SLT MW

Feature Manual References

1.1.82 Message Waiting

Operating Manual References

1.3.7 Built-in Voice Message (BV)

1.3.61 Message Waiting for Another Extension

3.1.3 Flexible Button Assignment Create or edit a Message button.

Operating Manual

107

Page 107
Image 107
Panasonic KX-TA824 manual Example