1.3 Telephone Features

• * You may have to enter the Call Hold feature number, "20", after pressing the Recall/ hookswitch on your single line telephone (SLT), depending on the SLT Hold Mode of your PBX. For more details, refer to "1.1.15 Call Hold" in the Feature Manual.

You can go on-hook before the destination extension answers the call. If the destination extension does not answer the call within a specified time period, you will hear an alarm tone, and the call will return to you. If you do not answer the call within 30 minutes after it returns to you, the call will be disconnected.

When the dialed extension is busy, you may access the extension by entering "1" (Busy Station Signaling [BSS]) or "2" (Executive Busy Override) and then going on-hook.

To return to the held call before the destination answers, press the TRANSFER button or corresponding CO/INTERCOM button, or press the Recall/hookswitch.

Programming Manual References

[PT Programming]

[005] One-touch Transfer Using a DSS Button

[104] SLT Hold Mode

[111] Music on Hold

[201] Transfer Recall Time

[PC Programming]

9.1.2 Main [1-2]—Music on Hold

9.1.7 Timers [1-6]—Recall Time—Call Transfer

9.1.11 Detail [1-10]—Single Line Telephone—Hold Mode, DSS—One-touch Transfer Using a DSS Button

Feature Manual References

1.1.15 Call Hold

1.1.25 Call Transfer—To Extension

Operating Manual References

3.1.3 Flexible Button Assignment

Create or edit a Direct Station Selection (DSS) button.

1.3.27Call Transfer—To Outside (CO) Line

You can transfer incoming calls to outside destination when your proprietary telephone (PT) is permitted through system programming.

No SLT

Operating Manual

63

Page 63
Image 63
Panasonic KX-TA824 manual Call Transfer-To Outside CO Line, PC Programming