58
On the base unit
This function enables the base unit to clear the following settings at one time.
All settings will return to the default settings (shown in brackets).
1
Press (Program), then (Intercom).
2
Press .
3
Enter the base unit password (p. 47).
4
When finished, press (Program).
•Aconfirmation tone sounds.
0
INT
0
----
------------– Bell selection 1 (All handsets)
– Base unit key tones 1 (ON)
– Base unit ringer volume ( 2 )
– Base unit ringer pattern ( 1 )
– Dialling mode 1 (TONE)
– Pause timing 1 (3 seconds)
– Call restricted handset(s) (All clear)
– Call restriction number(s) (All clear)
– Base unit password (0000)
– Time Break Recall/EARTH mode 1 (Time Break Recall)
Clearing the Settings in Memory
Cancel Button
Program Button
INT
Intercom Button
KX-TCD970E(E)(057~085) 98.10.8 3:28 PM Page 58