25
Chapter 1 Preparation
1. Press (Program), then (Intercom).
2. Press .
3. Press .
•The current setting, "1" or "2", is displayed on the base unit.
4. To set to LOW, press .
OR
To set to HIGH, press .
•The setting is displayed.
5. When finished, press (Program).
1
2
7
INT
Setting the VOX SENS Function
The VOX SENS function is preset to 1 (HIGH). If the unit continues to operate
after a caller hangs up or there are long pauses between or after messages, set
to 2 (LOW).
1. Press (Program), then (Intercom).
2. Press .
3. Press .
•The current setting, "1" or "2", is displayed on the base unit.
4. To set to 2 (ON), press .
OR
To set to 1 (OFF), press .
•The setting is displayed.
5. When finished, press (Program).
1
2
4
INT
Setting the Greeting Monitor Function
When your greeting message is being played to the caller, you can also listen to
it through the speaker. To listen to your greeting, set to 2 (ON).
The factory preset is 1 (OFF).
KX-TCD970E(E)(014~030) 98.10.13 7:35 PM Page 25