Preparing the Answering System

24
Selecting the Caller’s Recording Time
You may select the caller’s recording time as either "1 minute", "unlimited" or
"greeting only". The factory preset is "unlimited".
1. Press (Program), then (Intercom).
2. Press .
•" " is displayed on the handset.
•"P" is displayed on the base unit.
3. Press .
•The current setting is displayed on the base unit.
1: 1 minute 2: unlimited (factory preset) 3: greeting only
4. Press , or to select the recording time.
•The setting is displayed.
5. When finished, press (Program).
•When you select "greeting only", "--" is displayed on the base unit.
3
2
1
3
INT
If you select "greeting only", the unit will answer a call with the greeting
message, and then hang up. The unit will not record any messages.
1. Press (Program), then (Intercom).
2. Press .
3. Press .
•The current setting is displayed on the base unit.
4. Press a dialling button to to set the number of rings.
0: Selects "AUTO". "A" is displayed.
1–7: The unit will answer after the selected number of rings.
5. When finished, press (Program).
7
0
2
INT
Selecting the Number of Rings
You may select the number of rings before the answering system answers a call,
from 1 to 7 or AUTO (for Toll Saver). The factory preset is AUTO.
Toll Saver (When set to "AUTO")
When you call the unit from a touch tone telephone:
If the unit answers on the 2nd ring, there is at least one new message.
If the unit answers on the 5th ring, there are no new messages.
Hang up when you hear the 3rd ring.This will save you the toll charge for the call.
KX-TCD970E(E)(014~030) 98.10.8 3:32 PM Page 24