Increasing the range of the base unit

Programming

1MN#256

2Enter the base unit PIN (default: “0000”). R If you forget your PIN, contact an

authorised service centre.

3Select the handsets to be restricted by pressing 1 to 2.

R All handsets registered to the base unit are displayed.

R “” is displayed next to the selected handset numbers.

R To cancel a selected handset, press the same dial key again. “” disappears.

4MOKN

5Select a memory location by pressing 1 to 6. a MOKN

6Enter the phone number or area code to be restricted (8 digits max.). a MOKN a MeN

R To erase a restricted number, press MCN.

Changing the base unit PIN (Personal Identification Number)

Important:

RIf you change the PIN, please make note of your new PIN. The unit will not reveal the PIN to you. If you forget your PIN, contact an authorised service centre.

1MN#132

2Enter the current 4-digit base unit PIN (default: “0000”).

3Enter the new 4-digit base unit PIN. a

MOKN

4MbN: “Yes” a MOKN a MeN

Increasing the range of the base unit

You can increase the signal range of the base unit by using a DECT repeater. Please use only the Panasonic DECT repeater noted on page 4. Contact your Panasonic dealer for details.

Important:

RBefore registering the repeater to this base unit, you must turn the repeater mode on.

RDo not use more than one repeater at a time.

Setting the repeater mode

1MN#138

2MbN: Select the desired setting. a MOKN a MeN

Note:

RAfter turning the repeater mode on or off,

may be displayed on the handset momentarily. This is normal and the

handset can be used once is displayed.

Registering the DECT repeater (KX-A405) to the base unit

Note:

RPlease use a repeater that has not yet been registered to another unit. If the repeater is registered to another unit, deregister it first, referring to the Installation Guide for the DECT repeater.

1Base unit:

Proceed with the operation for your model.

n KX-TG6811 series: page 3 Press and hold MN for about 5 seconds. (No registration tone)