Panasonic KX-TG6812SA Making calls during a power failure, n When only 1 handset is registered

Making/Answering Calls

mode. In addition, in case handset battery power runs out, we recommend connecting a corded-type telephone (without AC adaptor) to the same telephone line or to the same telephone line jack, if you have such a telephone jack in your house.

RCalls cannot be made during a power failure until key lock is turned off (page 17).

RIf “Please wait for 1 minute.” is displayed, please do not operate the unit until the message disappears.

Panasonic Ni-MH battery performance (supplied batteries) during power back-up mode

When the batteries are fully charged, operating time of the handset in power back-up mode varies depending on usage.

–Continuous use of the handset in power back-up mode: 2 hours max.

–Continuous use of the handset other than a handset in power back-up mode: 3 hours max.

–Not in use in power back-up mode: 3 hours max.

Note:

RActual battery performance depends on usage and ambient environment.

Making calls during a power failure

nWhen only 1 handset is registered:

1 Lift the handset and dial the phone number.

2Within 1 minute, place the handset on the base unit.

R Wait until speakerphone is turned

on automatically and the call is made.

3When the other party answers the call, keep the handset on the base unit and talk using the speakerphone.

4When you finish talking, press MeN.

Note:

RIn step 2, if you do not place the handset on the base unit within 1 minute, the power back-up mode turns off. In this case, press

MeN on the handset and dial the phone number. Then try again from step 2.

nWhen 2 or more handsets are registered: You should leave one handset on the base unit for supplying power, and use another handset for making calls. For the operation, please see “Making calls”, page 15.

Note:

RDuring a call with the handset placed on the base unit (power back-up mode), the call may be disconnected if you touch the handset. In such case, try to call back.

RThe range of the base unit is limited during a power failure. Please use the handset close to the base unit.

Continuing a call during a power failure

When a power failure occurs during an outside call, the unit informs you with a notification tone. You can continue to talk for about 1 minute.

nWhen only 1 handset is registered:

If you want to continue the conversation, press MZN and then place the handset on the base unit.

nWhen 2 or more handsets are registered: If you want to continue the conversation, you should leave another handset on the base unit for supplying power.

18

TG68xxSA(en)_0619_ver011.pdf 18

2013/06/19 17:43:16