Panasonic KX-TG6821SA Special programming, Alarm, On 0 Off #173 Main menu, Caller Barred*2, *13

Programming
Sub-menu 1		Sub-menu 2	Settings	Code
First Ring*2, *8		–	1: <On> 0: Off	#173	–
Main menu:	“Caller Barred”*2, *13
Operation				Code
Storing/Viewing bar call numbers.				#217	28

*1 KX-TG6821 series: page 3

*2 If you program these settings using one of the handsets, you do not need to program the same item using another handset. (KX-TG6812)

*3 This menu is not displayed when scrolling through the display menus. It is only available in direct command code.

*4 This feature allows the unit to automatically adjust the date and time each time caller information including date and time is received.

To turn this feature on, select “Caller ID”. To turn this feature off, select “Manual”. (Caller ID subscribers only)

To use this feature, set the date and time first (page 13).

*5 KX-TG6812

*6 The ringer tone may continue to play for several seconds even if the caller has already hung up. You may either hear a dial tone or no one on the line when you answer the call.

*7 The preset melodies in this product (“Ringtone 3” - “Ringtone 40”) are used with permission of © 2012 Copyrights Vision Inc.

*8 If you do not want the unit to ring before the caller information is received, set to “Off”. (Caller ID subscribers only)

You can only remove the first ring if the unit rings 2 times or more by default, which depends on your service provider/telephone company.

*9 Turn this feature off if you prefer not to hear key tones while you are dialling or pressing any keys, including confirmation tones and error tones.

*10 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up the handset to answer a call, turn off this feature.

*11 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX supplier if necessary.

*12 To prevent other users from joining your conversations with outside callers, turn this feature on.

*13 KX-TG6811 series: page 3

Special programming

Alarm

An alarm sounds at the set time for 1 minute and is repeated 5 times at 5 minute intervals (snooze function). A text memo can also be displayed for the alarm. A total of 3 separate alarm times can be programmed for each handset. You can set one of 3 different alarm

options (once, daily, or weekly) for each alarm time.

Important:

RSet the date and time beforehand (page 13).

1MN#720

2Select an alarm by pressing 1 to 3. a

MOKN

26

TG68xxSA(en)_0619_ver011.pdf 26

2013/06/19 17:43:16