7.6. Alarm Output/Control Input Terminal Connections
7.6.1. Pin functions
Shown below are the numbers and names of the Alarm I/O terminal pins.
Alarm output / control input terminal
13 | 1 |
25 | 14 |
Pin No. | Function | Pin No. | Function |
1 | Ground | 14 | Alarm Output 10 |
|
|
|
|
2 | Alarm Output 1 | 15 | Alarm Output 11 |
|
|
|
|
3 | Alarm Output 2 | 16 | Alarm Output 12 |
4 | Alarm Output 3 | 17 | Ground |
|
|
|
|
5 | Ground | 18 | Alarm Output 13 |
|
|
|
|
6 | Alarm Output 4 | 19 | Alarm Output 14 |
7 | Alarm Output 5 | 20 | Alarm Output 15 |
|
|
|
|
8 | Alarm Output 6 | 21 | Alarm Output 16 |
|
|
|
|
9 | Ground | 22 | Alarm Output |
10 | Alarm Output 7 | 23 | Alarm Input |
|
|
|
|
11 | Alarm Output 8 | 24 | Home Position Selection Input |
|
|
|
|
12 | Alarm Output 9 | 25 | Auxiliary Input |
13 | Ground |
|
|
|
|
|
|
[Alarm Output Terminal] (Pin No. 1 – 16)
The terminal of the number corresponding to the
Operating current: Maximum 20 V, 20 mA
[Alarm Output Terminal] (Pin No. 22)
This terminal is shorted with the ground terminal even when only one of the alarm input terminals receives an alarm signal. The alarm output terminal is the NPN open collector output.
Operating current: Maximum 20 V, 20 mA
[Alarm Input Terminal] (Pin No. 23)
Shorting this terminal with the ground terminal when "OTHER16,"
Open voltage: 5 V DC,
[Home Position Selection Input Terminal] (Pin No. 24)
When
Open voltage: 5 V DC,
[Auxiliary Input] (Pin No. 25) Leave this input unconnected.
Open voltage: 5 V DC,
49