TOA Electronics C-RM500 T O F O C U S, O S I T I O N, Changing the lens speed

5.1.9. Changing the lens speed

The speed of lens movement when the Zoom or Focus key is pressed can be adjusted in 4 steps of operation: 1) Very slow, 2) Slow, 3) Moderately fast, 4) Fast.

Step 1. Press the Lens Speed key.

The speed indicator number increases by one each time the Speed key is depressed to indicate that the lens speed has been increased by one level. (Lens operating speed returns to "Very slow" when the Speed key is pressed while in Fast mode.)

Step 2. Repeat Step 1. until the desired speed is displayed.

LENS SPEED	LENS SPEED	LENS SPEED	LENS SPEED
LOW HIGH	LOW HIGH	LOW HIGH	LOW HIGH

Lights

5.1.10. Activating the auto-focus function

When a Combination camera is connected, the Auto-Focus function can be activated with a press of the Auto- Focus key.

AFAF

Press the Auto-Focus key while the camera is selected.

The indicator remains lit while the Auto-Focus function is in operation.

Lightis LCD screen

A U T O F O C U S

AF

Auto-focus operation is completed.

5.1.11. Selecting the camera position

Step 1. Enter the camera position number with the numeric keypad.

Step 2. Press the Position key.

The camera image corresponding to the selected position will be displayed on the monitor.

Note

(Example)

5

POSITION LCD screen

5 P O S I T I O N

When the Trace function is used in the camera setting, the selection of Position No. 255 executes Auto-Trace operations.

12