6. SETTINGS
6.1. Setting Items and Their Descriptions
Operation mode* | (Refer to p. 24) |
|
|
|
|
Switcher* | (Refer to p. 25) |
|
|
|
|
Contact point | (Refer to p. 26) |
|
|
|
|
Automatic reset | (Refer to p. 27) |
|
|
|
|
Home position | (Refer to p. 28) |
|
|
|
|
I/O speed* | (Refer to p. 29) |
|
|
|
|
Buzzer* | (Refer to p. 30) |
|
|
|
|
Initial screen | (Refer to p. 30) |
|
|
|
|
Channel designation | (Refer to p. 31) |
|
|
|
|
Sensor alarm | (Refer to p. 32) |
|
|
|
|
Camera alarm | (Refer to p. 32) |
|
|
|
|
Camera check | (Refer to p. 33) |
|
|
|
|
Camera alarm preset | (Refer to p. 34) |
|
|
Designates the unit as a master or slave.
Determines the type of switcher to be connected to the unit.
Sets the Alarm Contact Output Terminal's operation.
(Only valid when "MASTER" has been selected in the "Option mode" setting.)
Sets the function to automatically return the camera to a specified (Home) position after operation completion.
Sets the Combination camera's standby status.
Sets the transfer rate of each control terminal.
Sets whether or not to sound a buzzer when an alarm is engaged.
Sets the screen to be displayed on the monitor immediately after the power is switched ON.
Sets the channel (camera number) to be displayed first when the power is switched ON.
"ON" when using the Sensor Alarm function.
"ON" when using the Combination camera's alarm contact input.
Checks the Combination camera connected to the camera control terminal for 30 seconds.
Sets the position number and direction in which the Combination camera will automatically face when an alarm signal is received from the camera. (Only valid when "ON" has been selected in the "Camera alarm" setting.)
Alarm signal | (Refer to p. 35) |
|
|
|
|
Alarm interval | (Refer to p. 35) |
|
|
|
|
Alarm function | (Refer to p. 36) |
|
|
|
|
Alarm hold | (Refer to p. 36) |
|
|
|
|
Function key | (Refer to p. 37) |
|
|
|
|
Abbreviation | (Refer to p. 38) |
|
|
|
|
Tour sequence | (Refer to p. 39) |
|
|
|
|
Camera menu | (Refer to p. 40) |
|
|
Sets the type of alarm activation signal.
Sets the time interval from alarm signal reception to reset.
Sets the monitor display method when an alarm signal is received.
(Only valid when "EDGE" has been selected in the "Alarm signal" setting.)
Sets the monitor display to be switched when an alarm signal is received.
Displays the corresponding preset camera image (camera number and position number) on the monitor.
Displays the corresponding preset camera image (camera number and position number) on the monitor when the abbreviated number (entered with the numeric keypad) is entered, followed by the SET key.
Sequentially displays two or more camera outputs on full screen in order of reproduction (1 – 128) at preset time interval (seconds).
Calls up the camera's
Password | (Refer to p. 40) |
|
|
Sets the password required to open the menu.
*Can be set when "SLAVE" has been selected in the "Operation mode" setting. In this event, other items are not displayed on the menu screen.
21
