6.4.12. Camera check
Checks Combination cameras connected to the camera control terminal for 30 seconds.
Note
Once the Camera Check has been completed, only the cameras connected when the check was made can be controlled. Therefore, be sure to perform the camera check again whenever new cameras are added.
Step 1. Press the Menu key to display the menu screen.
Step 2. Tilt the joystick up or down to select "CAMERA CHECK," and confirm the selection with the SET key. The check takes approximately 30 seconds. All keys are disabled during the check.
The check interval is counted down from 30 (seconds) displayed to the right of Line 1. The camera numbers of the connected Combination cameras are displayed in numerical order on Line 2.
(Example) | C A M E R A C H E C K | 2 0 | |
| |||
| 1 , 2 , 1 0 , 1 5 , 1 6 , 2 0 |
| |
|
| ||
The indication "OK" is displayed after the
C A M E R A C H E C K O K 1 , 2 , 1 0 , 1 5 , 1 6 , 2 0 
After check completion, connected cameras can be confirmed by tilting the joystick to the left or right to scroll the screen.
C A M E R A C H E C K O K 1 , 2 , 1 0 , 1 5 , 1 6 , 2 0 
|
|
|
| C A M E R A C H E C K | O K |
| UP |
| UP | 3 0 |
|
LEFT | RIGHT | LEFT |
| RIGHT |
|
|
| or |
|
|
|
| DOWN |
| DOWN |
|
|
Step 3. Press the Clear key to return to the menu screen.
33
