Panasonic KX-TVA50 installation manual Installation Manual Document Version 3.0 2010/06

4.5KX-TD500 PBX Programming for DPT Integration

d.Select the card (101: DLC/DHLC for jacks 1-8; 201: DLC/DHLC for jacks 9-12) which connects with the VPS in the VPS Card menu.

5.Assignment of the extension ports connected to the VPS

a.Continue programming in the 1-4 VPS (DPT) Port Assignment screen.

b.Select the extension port number of the card (DLC/DHLC) to which the VPS (DPT) jack is to be connected in the Port No. menu. This program tells the KX-TD500 which extension ports are connected to the VPS. This allows the KX-TD500 to send the proper DPT integration information to these ports. Jack No. 1 must be assigned, because its port is used as the channel to control the VPS.

Note

•This menu is displayed only when the attribute of the ports is assigned to VPS (DPT) in step 2.

c.Assign DN for the port (click DN Refer to check the available directory numbers).

Note

•This program allows you to assign an extension number to each Voice Mail port. Since each port connected to the VPS provides two extensions, this enables you to assign extension numbers to each port. To reach the VPS, users dial these extension numbers.

d.Assign an extension group number for the port.

Note

•Specify the extension group number (126 or 127 by default) to which VM or AA is assigned. Group numbers 1 to 128 are available to the VPS through additional programming. (Selecting VM has the same effect as selecting AA, regardless of how the VPS is programmed.)

e.Click Apply to save the changed data.

118

Installation Manual Document Version 3.0 2010/06