4.2KX-TDE, KX-TDA, and KX-TAW Series PBX Programming for DPT Integration

4.2KX-TDE, KX-TDA, and KX-TAW Series PBX Programming for DPT Integration

The screen shots shown in this section are for the KX-TDA200. Programming procedures and availability may vary by PBX model, software version, etc. Refer to the documentation included with the PBX or consult your dealer for more information.

A group of DPT ports of the PBX connected to a VPS with DPT Integration is called a "VM (DPT) Group". Each VM (DPT) Group consists of a maximum of 12 ports (24 channels) of the VPS, and each VM (DPT) Group can be connected to a different VPS.

Maximum Number of VM (DPT) Groups

PBX Model

KX-TDE100/KX-TDE200

KX-TDA600

KX-TDA100/KX-TDA200

KX-TDA50

KX-TAW Series

Max. No. of VM (DPT) Groups

2

8

2

1

1

Through PBX system programming, you must assign the VM (DPT) Group and the VM (DPT) extension ports that will use DPT Integration.

1.Assignment of VM (DPT) Group

a.Go to the Groups-VM(DPT) Group-Unit Setting screen.

b.Assign a floating extension number to the VPS.

c.Click Apply to save the changed data.

Document Version 3.0 2010/06

Installation Manual

97

Page 97
Image 97
Panasonic KX-TVA50 installation manual Maximum Number of VM DPT Groups, Max. No. of VM DPT Groups