3.3 Starting KX-TVA Maintenance Console

3.3 Starting KX-TVA Maintenance Console

The instructions listed below explain how to start KX-TVA Maintenance Console. These instructions are for when connecting to the VPS via USB.

Note

The screenshots shown here are for reference only, and may differ from the screens displayed on your PC.

1.Click the KX-TVA Maintenance Console shortcut icon.

2.Select the appropriate VPS model and click OK.

3.The Enter Programmer Code dialog box is displayed. Enter the installer level programmer code (default: INSTALLER) and click OK.

Note

A programmer code is required to use the KX-TVA Maintenance Console. The System Administrator can change the programmer codes (see 1.9.9 Utility—Programmer Code in the Programming Manual).

4.The Set Default Parameters window is displayed the first time you start KX-TVA Maintenance Console. Select the TVA Type, PBX Type, and Integration Mode. Change the default parameters listed in the window if necessary, then click OK.

Document Version 3.0 2010/06

Installation Manual

89

Page 89
Image 89
Panasonic KX-TVA50 Starting KX-TVA Maintenance Console, Click the KX-TVA Maintenance Console shortcut icon